In this article we tell you how to change the name of your WiFi to give your network one more point of security.
That the configuration of your WiFi network is already established by default, since routers usually come like this from the factory, is the usual. Therefore, without being something that can happen inevitably, it may be that someone with sufficient knowledge get hold of your own WiFi network and, logically, of your connected devices.
Therefore, changing the name of your network can be a good way to complicate things for “hackers” shift. Now, if you don’t know how to do it, don’t worry, we are here to explain it to you. Of course, do not think that this is a super safe barrier, since for it you should also change your password.
How to change the name of a WiFi network
Focusing on changing the name of your WiFi, the process is easier than it may seem soon, but if you will have to follow several steps. Keep in mind that we are going to explain using windowsbut with other systems it can be done in other ways as well.
For a start, you have to find out what is the local IP of your router, or gateway. To do this, you can look directly at your own router, but you can also do the following: open the Windows menu and type cmd. The system itself will suggest “Command Prompt”, so open it and it will take you to a terminal, in which if you put “ipconfig” it will show you several IP addresses.
Of all of them, you have to copy the one that corresponds to your gateway, which usually starts with 192.168.XX.XX, something you can see on your own router as well. Therefore, it is your decision how to do it. Back on topic, once you have your gateway address, paste it in your browser address bar hit enter. In this way, we will access the router configuration.
It is worth mentioning that, each router and each teleoperator has its configuration page and their differences, but what is important is that they will coincide. Once inside, to access the configuration options, you will have to put a username and passwordwhich will also be on the router itself.
Of course, all this data is for you and the inhabitants of your house, so you don’t have to give them to anyone else. Now yes, once within these options, you must choose the ones that we discussed in this article, with the aim of being as cautious as possible and not messing it up. In this case, you have to look for the section “WiFi network name (SSID)”, or similar. That’s where you’ll find your network name.
Now, you can now change your SSID, your WiFi network name. Do not get overwhelmed if you do not find everything at first, since each router has its menus. So, don’t be afraid to research and look closelyyes, without touching anything during the aforementioned process.
At this point, you know, do not put anything that is personal data or anything that can be easily identified. Basically, put something that is complicated enough to make things difficult for hackers, but something more or less easy for you and your family to remember. In addition, here we give you some names for your WiFi that are sure to be original to you.
when you do this, You can now save the changes and exit the options router configuration.
This, as we have already said, is not a definitive barrier against hackers, but yes that is a way to complicate the task. Of course, if you want to further protect your WiFi network and your devices, you should change the password too. In this way, by changing the default configuration of your router, give your network one more point of protection.
Related topics: Technology